The tower stands 2.2 meters tall. The base is 3m in diameter.
The arcs generated by the rider are up to 2.5 meters long… Clearance of 12 meters from the tower is required for audience and 8 meters for electrical equipment. The stage area is 8 x 8 m. The public safety area is 6 x 6 m. This is required to be fenced and secured by the client. If indoors, there must be a minimum ceiling height of 8 meters, with no electrical equipment above the 15 x 15m clear zone. (Contact to discuss exceptions to this…) See plans or stage and safety zones below/ please contact to discuss any exceptions for this.
These are general requirements we need on site for the show.
A flat stage platform on which to set machines up and to perform on. The minimum requirement for this is a 8x8m stage at a height of 1 m with some steps up at the rear and a black valance. The orientation of this stage is ideally on the diagonal. This gets the crowd as near as possible to the Lightning.
The total weight of all our equipment and performers will not exceed 1000kgs at any time.
A secure dressing room/tent nearby for the performers to fit their suits.
Access to stage for a Mercedes Sprinter MWB van. Please make contact to discuss any exceptions to this.
A 3 phase generator must be provided to supply the 415v 32Amps/phase, that is required to operate the machine. This is to ensure isolation from the other stage equipment being used and is for safety purposes…
Our power lead gives a length of 5 meters, and connects via a CeeForm 32A 5 pin plug, or stud connection. (please advise your preference.)
NB Every venue has it’s own parameters. Please contact us with as much detail as possible as this is only a guide.