Each of the two towers stand 2.2 meters tall. Each base is 2m x 1.2m. When set up, the bases are separated by a distance of up to 5 meters.
The arcs between the two coils are up to 4 meters long… Clearance of 6 meters from the towers is required for audience and 8 meters for electrical equipment. The stage area is 12 x 12 m The public safety area is 15 x 15 m. This is required to be fenced and secured by the client. If indoors, there must be a minimum ceiling height of 8 meters, with no electrical equipment above the 15 x 15m clear zone. (Contact to discuss exceptions to this…) See plans or stage and safety zones below/ please contact to discuss any exceptions for this.
These are general requirements we need on site for the show.
A flat stage platform on which to set machines up and to perform on. The minimum requirement for this is a 12x12m stage at a height of 1 m with some steps up at the rear and a black valance. The orientation of this stage is ideally on the diagonal. This gets the crowd as near as possible to the Lightning.
The total weight of all our equipment and performers will not exceed 1500kgs at any time.
A secure dressing room/tent nearby for the performers to fit their suits.
Access to stage for a Mercedes Sprinter.
A 3 phase generator must be provided to supply the 415v 63Amps/phase, that is required to operate the machine. This is to ensure isolation from the other stage equipment being used and is for safety purposes…
Our power lead gives a length of 25 meters, and connects via a CeeForm 63A 5 pin plug, or stud connection (please advise your preference).
NB Every venue has it's own parameters. Please contact us with as much detail as possible as this is